VACUUM GAUGES: PIRANI GAUGE-DPRG series Download Product Broucher
• Measurement range 0.001 to 1000 mbar
• Easy “ATM” and “0” adjustment on the signal conditioner PCB
• Space saving rugged design- 1/8 DIN console
• Mounts in any orientation
• Brass body measuring cell with metal-sealed feed through
• With universal power supply – input voltage from 90 ~ 264VAC, frequency 47 ~ 440Hz
• Integrated set point adjustment and relay output
• Easy To Read 4 Digit Backlit Display
• Dual Set Point Controller With 2 Relays (select model DPRG-2GH-SP)
• Change Cable Length Without Re-calibrating upt o 8 mtrs |
 |
The UVS Model DPRG series Vacuum Pirani Gauge Controller displays vacuum pressure as measured from a S-PR-GH sensor tube. It displays vacuum measurements based on thermal conductivity of air or nitrogen. The Model DPRG-XGH-SP controller covers the range from 0.001bar to 1000 mbar, and controls relay with independent set point.
***The optional RS232 along with analog output 0 to 10V and 4 to 20 mA facility can be obtained on request
Applications
• Controlling high vacuum systems
• Fore vacuum pressure monitoring
• Safety circuits in vacuum systems
• General vacuum measurement & control in the fine and rough vacuum range.
Specifications:
| MODLES |
DPRG-1GH |
DPRG-1GH-SP |
DPRG-2GH |
DPRG-2GH-SP |
DPRG-1GH-2SP |
| Number of sensor channels |
ONE |
TWO |
ONE |
Display Range |
FULL range: 0.001 to 1000 mbar |
| Measuring Range |
USEFUL range :0.001mbar to 100 mbar |
| Units of Display |
m Bar |
| Vacuum Gauge |
S-PR-GH sensor tube |
| Temp. Range |
2 to +50 deg. Celsius |
| VAC. Display |
4-digit bright red LED, 14 mm high |
| Display Indicators |
NIL |
Red LED for SET PT 1 |
Red LED for channel 1&2 selected |
Red LED for channel 1&2
Selected& red LED for SET PT 1&2 |
RED LED for set point 1 & 2 |
VAC and ATM Adjust |
adjusted by trim pot at the signal conditioner PCB. |
|
| Process control set points |
NIL |
ONE |
NIL |
TWO |
TWO |
| Process Control Relays |
NIL |
One relay, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector |
NIL |
Two relays, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector |
Two relays, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector |
| Nonvolatile Memory |
for SET POINTS |
| Operating Voltage |
universal power supply, which operates on input voltages from 90 ~ 264VAC 50/60 Hz; standard IEC 320 instrument power input receptacle on rear panel; replacement fuse type:
5 mm X 20 mm, 2 amp |
| Mounting |
Side clips are provided for panel mounting in standard
¼ DIN 92 x 92 mm (3.62” x 3.62") |
| Environmental Considerations |
not for use with explosive or corrosive gases |
|